Are the joints of the kitchen tiles very dirty?

We don't have to tell you at this point how perfect the tiles are to cover the walls of the kitchen . In fact, we are not going to do it because we have already talked about it in other previous posts.

The thing is, for both the kitchen and the bathroom, which are two very hard rooms in our home, the tile is perfect.

But…

How do we clean the tiles?

It does not matter where you place them, but you should know that between them there is always a kind of white paste, which is what you often see get dirty by time.

Some of the things that make these joints dirty are dust or grease. And it is necessary to clean them so that they are always in the best condition.

Some solutions so that the tiles are pristine

Luckily, cleaning a tile is an extremely easy task . You can use products that they sell, but you can also use some homemade methods that will make your tiles look like new.

Sodium bicarbonate

Thus, one of the most common products for a natural and one hundred percent ecological cleaning is sodium bicarbonate . It is great for removing dirt that is embedded in the tile, and also neutralizes the action of bacteria.

Add about one hundred grams to a glass of hot water, and with a brush, rub the white joints after sprinkling the water with bicarbonate of soda. You will see that the joints are perfect.

If you see that there are dirtier areas, let the solution act for 20 minutes, and then rinse the area where you have applied it with soap and water.

White vinegar

Another option is to clean them with white vinegar , since it kills bacteria and fungi, and has a spectacular whitening power. It will also stop it from smelling musty. To use it, follow the same steps we mentioned before.

Properly cleaning the tile joints is essential not only to prevent possible damage to health, but for the appearance of the tiles to be the best possible.

And you, how do you clean them?

Share this post